<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title>技术资料</title>
<link>http://www.myptfe.comhttp://www.myptfe.com/Teflon/Technical/</link>
<description>技术资料</description>
<language>zh-cn</language>
<generator><![CDATA[中国氟塑料网 版权所有]]></generator>
<webmaster>davis.huan@hotmail.com</webmaster>
<item>
    <title><![CDATA[对PPS滤料做PTFE浸渍处理的原因？]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201201/1338.html</link>
    <description><![CDATA[PTFE浸渍处理可能改善的滤料机能是：一是可以使圆滑的PPS纤维表面变得粗拙一些（由于浸渍不可能是很平均的），或许可以来改善PPS滤料的过滤效率。]]></description>
    <pubDate>2012-01-19</pubDate>
    <category>工艺配方</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE涂料参考配方]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201201/1337.html</link>
    <description><![CDATA[PTFE涂料参考配方:选用聚四氟乙烯浓缩分散液为基料 ，其中添加填料(填料经烘干后过 600目筛网)和助剂 ，步骤如下。]]></description>
    <pubDate>2012-01-19</pubDate>
    <category>工艺配方</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[工业过滤用PTFE的主要生产厂家]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201201/1336.html</link>
    <description><![CDATA[工业过滤用PTFE的主要生产厂家:山东嘉年华氟纶有限公司 主要有PTFE短纤维、长丝纤维、缝纫线、基布等产品，目前上海博格在用，年用量30吨左右。]]></description>
    <pubDate>2012-01-17</pubDate>
    <category>行业应用</category>
    <author>杨奇</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE在工业过滤中的产品种类及应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201201/1335.html</link>
    <description><![CDATA[PTFE在工业过滤中的产品种类及应用:PTFE纤维,PTFE基布,PTFE缝纫线,PTFE膜,PTFE乳液。]]></description>
    <pubDate>2012-01-17</pubDate>
    <category>行业应用</category>
    <author>杨奇</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PFA注塑常见缺点与解决办法]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201201/1332.html</link>
    <description><![CDATA[PFA注塑常见缺点与解决办法:注射模塑缺点和反常现象最终集中在注塑制品的质量上反映出来。注塑制品缺点可分成下列几点：产品注射不足，产品溢边，产品凹痕和气泡，产品有接痕，产品发]]></description>
    <pubDate>2012-01-15</pubDate>
    <category>工艺配方</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[聚四氟乙烯的成型特点浅述]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201110/1240.html</link>
    <description><![CDATA[聚四氟乙烯一般采用压缩成型的方法，也可采用柱塞式挤出成型。采用分散聚合法得到的树脂可采用糊膏挤出和压延成型。聚四氟乙烯以外的含氟树脂可采用热塑性树脂的成型方法如模压，传递模]]></description>
    <pubDate>2011-10-06</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[聚四氟乙烯防腐蚀涂层的研究进展]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201105/1174.html</link>
    <description><![CDATA[聚四氟乙烯(PTFE)的一些固有缺陷,限制了其作为防腐蚀涂层在化工领域中的应用.为了改善PTFE的性能,人们做了大量的研究工作.综述了国内外近几年来PTFE衬里的方法、衬里性能和衬里设备在化工防腐]]></description>
    <pubDate>2011-05-02</pubDate>
    <category>技术论文</category>
    <author>韩晓燕,陈旭</author>
    <comments>天津大学</comments>
</item>
<item>
    <title><![CDATA[FEVE氟碳涂料耐酸碱性和耐溶剂性研究]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201010/1087.html</link>
    <description><![CDATA[比较了不同类型FEVE氟碳涂料的耐酸碱性能和耐溶剂性能，并简要分析了原因。]]></description>
    <pubDate>2011-09-03</pubDate>
    <category>技术论文</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE玻纤烧结耐高温滤料的研发及应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201008/1078.html</link>
    <description><![CDATA[简要分析了PTFE玻纤烧结耐高温滤料工艺特点，介绍了该种滤料的性能、特性及工程应用实例，表明PTFE玻纤烧结耐高温滤料是一种具备耐高温、耐高湿、抗化学腐蚀性的高性能滤料，具有广阔的]]></description>
    <pubDate>2011-04-30</pubDate>
    <category>技术论文</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[氟塑料产品在危险废物处理工艺中的应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201008/1073.html</link>
    <description><![CDATA[氟塑料产品在危险废物处理工艺中的应用：氟塑料产品在使用温度，耐磨损性能，耐腐蚀性能等方面具有比FRP,ABS,RPP,PE等常用的防腐材料更加广泛的使用范围及应用效果，在危险废物的处理工艺]]></description>
    <pubDate>2010-08-03</pubDate>
    <category>技术论文</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网搜集整理</comments>
</item>
<item>
    <title><![CDATA[氟塑料电缆及其应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201006/1070.html</link>
    <description><![CDATA[氟塑料是对各种含氟聚合物的总称。是指含有氟原子的单体自聚或者与其他不含氟的材料共聚而成的聚合物。由于氟塑料有着优异的电气性能，热稳定性能和机械物理性能，因此适合用作电线电]]></description>
    <pubDate>2011-05-01</pubDate>
    <category>行业应用</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[纳米CaCO3改性氟树脂涂料的制备]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201004/1038.html</link>
    <description><![CDATA[加入纳米CaCO3和白炭黑改善了常温固化型氟树脂涂料性能及涂装工艺性能。]]></description>
    <pubDate>2011-09-03</pubDate>
    <category>技术论文</category>
    <author>氟树脂</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[国内同行聚四氟乙烯分散树脂产品指标对照表]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/201003/1031.html</link>
    <description><![CDATA[国内同行聚四氟乙烯分散树脂产品指标对照表]]></description>
    <pubDate>2010-03-25</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE表面改性方法：高温熔融改性]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200912/1010.html</link>
    <description><![CDATA[高温熔融改性法是将一些表面活性较强、易粘合和粒径较小的填料(如二氧化硅、铝粉等)在高温条件下烧结到PTFE表面，以此来改变PTFE表面的结构与性质，达到提高粘接强度的目的。]]></description>
    <pubDate>2009-12-13</pubDate>
    <category>工艺配方</category>
    <author>王志超等</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE表面改性方法：钠一萘络合物化学改性]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200912/1009.html</link>
    <description><![CDATA[钠一萘处理液是由等量(物质的量)的钠和萘在四氢呋哺、乙二醇二甲醚等活性醚中溶解或络合而成的。]]></description>
    <pubDate>2011-09-11</pubDate>
    <category>工艺配方</category>
    <author>王志超等</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯产品类型及应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200910/990.html</link>
    <description><![CDATA[目前，膨胀聚四氟乙烯密封制品主要有3种，即接口密封胶带(代垫片用)，阀杆填料和GFO纤维泵用填料。]]></description>
    <pubDate>2009-10-04</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯成型原理]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200910/989.html</link>
    <description><![CDATA[聚四氟乙烯是一种高结晶的聚合物，结晶结构是六面体的片晶。拉伸时，在外力和热作用下片晶与片晶之间的界面首先被拉开，形成细小的纤维和空隙。]]></description>
    <pubDate>2009-10-04</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯成型工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/977.html</link>
    <description><![CDATA[膨胀聚四氟乙烯的成型分两个阶段。第一阶段将PTFE散树脂与润滑助剂按一定比例混合]]></description>
    <pubDate>2009-09-21</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[阀杆膨胀聚四氟乙烯密封填料的使用安装]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/972.html</link>
    <description><![CDATA[膨胀聚四氟乙烯密封填料具有高度柔顺性，挠曲度大，装填极为方便，可根据阀杆填料函空间的形状随意成型。]]></description>
    <pubDate>2009-09-15</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯接口密封垫片使用安装]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/968.html</link>
    <description><![CDATA[使用膨胀聚四氟乙烯接口密封垫片时，首先将被密封的设备端面清除污物，使其尽可能的形成光洁平面，减少杂质或污物残留在密封面上，然后用95%含量的酒精清洗密封端面，确保密封面没有尘垢]]></description>
    <pubDate>2009-09-14</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯密封产品优异性能]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/967.html</link>
    <description><![CDATA[膨胀聚四氟乙烯密封产品可在-268～320℃的温度范围内安全使用。]]></description>
    <pubDate>2009-09-14</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯密封材料使用范围]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/966.html</link>
    <description><![CDATA[膨胀聚四氟乙烯密封材料使用范围:各种(特别是非金属)管道端面联接或带配件的法兰面密封。]]></description>
    <pubDate>2009-09-13</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[膨胀聚四氟乙烯密封效果研究]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/960.html</link>
    <description><![CDATA[1969年Bob Gore发明了膨体聚四氟乙烯(Expanded PTFE)。它是将PTFE分散树脂的生料膜片经独特的拉伸工艺制造而成的一种含有大量微孔、高韧性的低密度材料，将其用在密封上获得了成功，取得了专利]]></description>
    <pubDate>2009-09-10</pubDate>
    <category>行业应用</category>
    <author>李大武</author>
    <comments>未知</comments>
</item>
<item>
    <title><![CDATA[改性聚四氟乙烯密封效果研究]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/959.html</link>
    <description><![CDATA[聚四氟乙烯的刚性影响了它的动态密封的效果，超过特定的压缩应力时，会使聚四氟乙烯垫圈产生“冷流”(蠕变)而被压扁，使之密封应用受到很大的限制。]]></description>
    <pubDate>2009-09-10</pubDate>
    <category>行业应用</category>
    <author>李大武</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE辐射裂解工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/956.html</link>
    <description><![CDATA[PTFE是性能优异的高分子材料，却对辐射非常敏感。一般条件下受到小剂量辐射就会导致其性能变化和分子量下降。]]></description>
    <pubDate>2009-09-09</pubDate>
    <category>技术资料</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE热裂解工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/955.html</link>
    <description><![CDATA[把高分子量PTFE置于450℃以上裂解成小分子氟化物，如TFE、HFP、HF、八氟环丁烷、氟代光气、全氟异丁烯。]]></description>
    <pubDate>2009-09-09</pubDate>
    <category>工艺配方</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE配位聚合工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/954.html</link>
    <description><![CDATA[该引发剂由可作为自由基(来源)的含氯、含溴、含碘的有机化合物和有机磷酸三酯与周期表中第4族～第12族中的过渡金属卤化物组成的金属络合物组成。]]></description>
    <pubDate>2009-09-08</pubDate>
    <category>工艺配方</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE悬浮聚合工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/953.html</link>
    <description><![CDATA[聚合在水介质中在自由基引发剂和调聚剂的存在下进行，反应器在聚合期间进行搅拌，以便足以产生凝结，直接从反应器中离析出低分子量PTFE。]]></description>
    <pubDate>2009-09-08</pubDate>
    <category>工艺配方</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE溶液聚合工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/952.html</link>
    <description><![CDATA[以往TFE调聚物是以氯氟碳为溶剂进行聚合得到的。]]></description>
    <pubDate>2009-09-08</pubDate>
    <category>工艺配方</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE乳液聚合工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/951.html</link>
    <description><![CDATA[目前PTFE常见的乳液聚合是在一定温度及压力条件下搅拌，以水为介质，以全氟辛酸铵为乳化剂，过硫酸盐为引发剂进行聚合，在反应过程中加入分子量调节剂来控制PTFE聚合度。]]></description>
    <pubDate>2009-09-08</pubDate>
    <category>工艺配方</category>
    <author>张成德</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[PTFE纤维的应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200909/946.html</link>
    <description><![CDATA[世界上只有屈指可数的公司有能力将聚四氟乙烯材料加工成纤维及单丝，用其生产出的纤维具有低摩擦性、难燃烧性及良好的绝缘和隔热性。]]></description>
    <pubDate>2009-09-06</pubDate>
    <category>行业应用</category>
    <author>何正兴</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[GORE覆膜滤料在窑尾收尘器上的应用]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/913.html</link>
    <description><![CDATA[GORE覆膜滤料在窑尾收尘器上的应用：GORE覆膜滤料在窑尾收尘器上的应用遍及世界各地，早已是全球水泥生产厂商公认的高性能滤料的领军者。]]></description>
    <pubDate>2009-08-13</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[选用GORE覆膜滤料的技术和经济效益]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/912.html</link>
    <description><![CDATA[选用GORE覆膜滤料的技术和经济效益：GORE 薄膜能有效阻止粉尘微粒渗入滤料深层，此可以消除由于粉尘进入滤袋内部造成的磨损，这样基料一直处于清洁状态，可以延长滤袋的机械寿命。]]></description>
    <pubDate>2009-08-13</pubDate>
    <category>行业应用</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[戈尔GORE膨体聚四氟乙烯材料介绍]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/911.html</link>
    <description><![CDATA[戈尔GORE膨体聚四氟乙烯材料介绍：戈尔公司是世界上第一个创造和发明用膨体聚四氟乙烯材料制造具有“表面过滤”特性覆膜滤料的公司。]]></description>
    <pubDate>2009-08-12</pubDate>
    <category>原料制品</category>
    <author>刘小峰 吴军平</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[FEP衬里模具设计]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/910.html</link>
    <description><![CDATA[FEP衬里模具设计：因为压注时，注射力在模具内部被平衡，托架只需承受模具重量和用于注口接触密封的作用压力。总负重不超过15kN，且振动极小，所以托架可为一焊接件，不必要太厚重。]]></description>
    <pubDate>2009-08-12</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[FEP衬里产品设计]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/908.html</link>
    <description><![CDATA[FEP衬里产品设计：衬里产品的设计是设计模具的依据。一方面要使产品具有较好的通用性， 即有关结构尺寸、按装尺寸等尽量与阀内有关标准的规定一致。]]></description>
    <pubDate>2009-08-12</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[FEP衬里产品及模具设计介绍]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/907.html</link>
    <description><![CDATA[FEP衬里产品及模具设计介绍： FEP、PFA等可熔融氟塑科加工而成的衬里、阀门、管件等产品，在化工行业的应用越来越为人们所重视． 兹蒋这种产品及模具的设计重点介绍于下。 ]]></description>
    <pubDate>2009-08-11</pubDate>
    <category>原料制品</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100%聚四氟乙烯针刺过滤毡的应用情况]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/906.html</link>
    <description><![CDATA[100%聚四氟乙烯针刺过滤毡的应用情况：100％聚四氟乙烯针刺过滤毡具有耐腐蚀、耐高温、良好的低摩擦性、难燃烧性以及良好的绝缘和隔热性，可承受各种强氧化物的氧化腐蚀，具有良好的过]]></description>
    <pubDate>2009-08-11</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100％聚四氟乙烯针刺过滤毡的结构与性能指标]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/905.html</link>
    <description><![CDATA[100％聚四氟乙烯针刺过滤毡的结构与性能指标。]]></description>
    <pubDate>2009-08-11</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100％聚四氟乙烯针刺过滤毡的后处理]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/903.html</link>
    <description><![CDATA[100％聚四氟乙烯针刺过滤毡的后处理：由于经过一系列机械加工及纤维本身的原因，针刺毡在受热时会产生收缩的问题。]]></description>
    <pubDate>2009-08-10</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100％聚四氟乙烯纤维梳理、铺网、针刺工艺]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/902.html</link>
    <description><![CDATA[100％聚四氟乙烯纤维梳理、铺网、针刺工艺：众所周知，聚四氟乙烯纤维静电大，卷曲度小，纤维光滑，抱合力差，且密度大，要将这样的纤维进行梳理、铺网非常困难。]]></description>
    <pubDate>2009-08-10</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100%聚四氟乙烯针刺过滤材料制作流程]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/901.html</link>
    <description><![CDATA[100%聚四氟乙烯针刺过滤材料制作流程：100％聚四氟乙烯针刺过滤毡与一般合纤的针刺过滤毡生产流程基本一致。]]></description>
    <pubDate>2009-08-10</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[100%聚四氟乙烯针刺过滤材料介绍]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/900.html</link>
    <description><![CDATA[100%聚四氟乙烯针刺过滤材料介绍：聚四氟乙烯纤维优异的耐高温、耐腐蚀性能，使其成为高温针刺过滤材料的理想原料，在国外已经有许多应用报道。]]></description>
    <pubDate>2009-08-10</pubDate>
    <category>原料制品</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[调节阀填料泄露的措施]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/881.html</link>
    <description><![CDATA[调节阀填料泄露的措施：在现场实际应用中，发生调节阀泄漏的原因多种多样，只要我们勤于观察、善于分析，逐个排除泄漏产生的原因，调节阀填料泄露的问题基本上还是能够消除的。]]></description>
    <pubDate>2009-08-07</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[调节阀填料泄露的主要原因]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/880.html</link>
    <description><![CDATA[调节阀填料泄露的主要原因：调节阀在现场的使用过程中，由于环境、工况以及阀体自身结构等多种原因造成调节阀的填料处发生泄漏，是调节阀比较常见的故障，也是影响系统装置连续生产的]]></description>
    <pubDate>2009-08-07</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[塑料配方设计方法]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/879.html</link>
    <description><![CDATA[塑料配方设计方法：塑料配方中不同品种助剂的最佳用量及配合决定着制品质量的好坏，在如何使实验次数最少、配方最优的问题上，配方设计方法起着很大的作用。 ]]></description>
    <pubDate>2009-08-07</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[塑料配方设计原则之助剂的选择]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/878.html</link>
    <description><![CDATA[塑料配方设计原则之助剂的选择：虽然塑料的种类很多，有各种不同的性能，但要满足产品的具体要求，还要对塑料进行改性，这就要在树脂中加入适合的助剂。]]></description>
    <pubDate>2009-08-07</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[塑料配方设计原则之树脂的选择]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/877.html</link>
    <description><![CDATA[塑料配方设计原则之树脂的选择：树脂的选择包括树脂品种、牌号以及其流动性的选择。树脂要选择与改性目的最接近的品种，以节省助剂的使用量。]]></description>
    <pubDate>2009-08-06</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[塑料配方设计要点]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/876.html</link>
    <description><![CDATA[塑料配方设计要点：配方设计的关键为选材、搭配、用量、混合四大要素，表面看起来很简单，但其实包含了许多内在联系，要想设计出一个高性能、易加工、低价格的配方也并非易事。]]></description>
    <pubDate>2009-08-06</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>
<item>
    <title><![CDATA[塑料配方设计原则]]></title>
    <link>http://www.myptfe.com/Teflon/Technical/200908/875.html</link>
    <description><![CDATA[塑料配方设计有以下注意事项：①制品的使用功能；②加工性能；③加工及使用时的环保问题；④成本等。]]></description>
    <pubDate>2009-08-06</pubDate>
    <category>工艺配方</category>
    <author>聚四氟乙烯</author>
    <comments>中国聚四氟乙烯网</comments>
</item>

</channel>
</rss>

