<?xml version="1.0" encoding="utf-8" ?>
<rss version="2.0">
<channel>
<title>氟塑问答</title>
<link>http://www.myptfe.comhttp://www.myptfe.com/plus/list.php?tid=7</link>
<description>氟塑问答</description>
<language>zh-cn</language>
<generator><![CDATA[中国氟塑料网 版权所有]]></generator>
<webmaster>davis.huan@hotmail.com</webmaster>
<item>
    <title><![CDATA[反应釜的内衬PTFE脱落了，如何处理？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1331.html</link>
    <description><![CDATA[反应釜的内衬PTFE脱落了，如何处理？在外加工的反应釜，外夹套蒸汽加热（0.2-0.4MPA）的，用了才几十个小时，筒体内的PTFE和不锈钢基体就脱落了（常压蒸馏），怎么办啊？]]></description>
    <pubDate>2012-01-14</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE衬里管道厂家哪家最好？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1330.html</link>
    <description><![CDATA[PTFE衬里管道厂家哪家最好？双屿、伟光、特氟龙这三家都还不错。]]></description>
    <pubDate>2012-01-14</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE耐液溴的能力怎么样？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1329.html</link>
    <description><![CDATA[PTFE耐液溴的能力怎么样？对于介质为液溴的我们也做过一些，腐蚀性是肯定没问题的了，关键是液溴的渗透性能很强，所以使用寿命必然会受到一些影响。]]></description>
    <pubDate>2012-01-14</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE可以耐氟气和HF吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1328.html</link>
    <description><![CDATA[PTFE可以耐氟气和HF吗？没问题，但是压力不要太高还有温度，PTFE理论上温度到200°C。]]></description>
    <pubDate>2012-01-14</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PVDF膜的主要用途及功能有哪些？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1321.html</link>
    <description><![CDATA[PVDF膜的主要用途及功能有哪些？PVDF膜这种说法很笼统，因为PVDF膜有很多种，水处理用PVDF膜，分为超滤膜和微滤膜两种，主要用于污水、海水淡化等的前处理，清除大分子、细菌、泥沙等杂质。]]></description>
    <pubDate>2012-01-11</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PVDF是什么材料？属于哪种塑料？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1320.html</link>
    <description><![CDATA[PVDF是什么材料？属于哪种塑料？PVDF就是一种塑料，应用范围现在比较广，我这边接触的板材和棒料比较多，国产的发黄，相关技术还是比较差，进口的是晶白色。]]></description>
    <pubDate>2012-01-11</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PVDF的主要用途有哪些？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1319.html</link>
    <description><![CDATA[PVDF的主要用途有哪些？光伏设备，因为要用到HF酸,硝酸等强酸，所以整套设备都是塑料材质的，其中强酸方面用PVDF，阀门管路管件泵浦，板材都是PVDF的。]]></description>
    <pubDate>2012-01-11</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE材料的耐温是多少呢？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1300.html</link>
    <description><![CDATA[PTFE材料的耐温是多少呢？最高可耐到250℃，但实际使用中用到180℃。如果是用于控制阀的填料，230℃以下可以使用PTFE。]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[输送98%浓硫酸用PVDF还是碳钢衬PTFE呢？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1299.html</link>
    <description><![CDATA[输送98%浓硫酸用PVDF还是碳钢衬PTFE呢？管径：DN8，压力：PN10，输送距离：100米。这个口径建议还是用PVDF管道，我的一个客户用来两三年了，性能一直很好。]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[“碳钢衬PTFE”与“碳钢衬胶”使用区别？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1298.html</link>
    <description><![CDATA[“碳钢衬PTFE”与“碳钢衬胶”使用区别？一般来说，这两种说法是一个意思，都是指衬氟阀门，那严格来说，又有区别，那就里衬的材质不一样。]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[钢衬PTFE管应力分析]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1297.html</link>
    <description><![CDATA[钢衬PTFE管应力分析。有朋友做过钢衬四氟的管道吗?这类管道能否用caesar2计算?需要注意些什么呢?]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[内PTFE软管,外不锈钢编制,使用寿命如何?]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1296.html</link>
    <description><![CDATA[内PTFE软管,外不锈钢编制,使用寿命如何?准备用来输送下120度左右硝酸，不知道使用寿命怎么样，连在泵前后。]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE隔膜计量泵寿命如何？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201201/1295.html</link>
    <description><![CDATA[PTFE隔膜计量泵寿命如何？120度的热硝酸，没有特别好的耐腐蚀材料，想用PTFE的隔膜计量泵，不知道寿命如何？]]></description>
    <pubDate>2012-01-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[聚四氟乙烯有哪些使用优点？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1269.html</link>
    <description><![CDATA[聚四氟乙烯有哪些使用优点？聚四氟乙烯相对分子质量较大，低的为数十万，高的达一千万以上，一般为数百万（聚合度在104数量级，而聚乙烯仅在103）。一般结晶度为90～95%，熔融温度为327～34]]></description>
    <pubDate>2011-12-22</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE的热膨胀厉害,影响密封]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1266.html</link>
    <description><![CDATA[有个聚四氟乙烯的法兰和不锈钢法兰连接，PTFE比较后，有20MM左右，受条件限制，厂家完全靠螺纹攻丝连接受力的，没有螺母（基本常压）。]]></description>
    <pubDate>2011-12-21</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE、PFA、FEP、ETFE的区别有哪些？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1265.html</link>
    <description><![CDATA[PTFE、PFA、FEP、ETFE的区别有哪些？PTFE聚四氟乙烯 （也有叫PTEF的），PFA 四氟乙烯—全氟烷氧基乙烯基醚共聚物 （又叫：过氟烷基化物），FEP 氟化乙烯丙烯共聚物（又叫F46，是四氟乙烯和六氟丙烯]]></description>
    <pubDate>2011-12-21</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PP内衬和PTFE内衬管道及管件价格差异有多少？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1264.html</link>
    <description><![CDATA[PP内衬和PTFE内衬管道及管件价格差异有多少？在PP和PTFE都满足条件的情况下，想了解一下两者的价格差异，如果价格相差不多的话，就想选用PTFE内衬。有哪位前辈指点一下？感谢了。]]></description>
    <pubDate>2011-12-21</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[RPTFE是增强聚四氟乙烯吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1263.html</link>
    <description><![CDATA[RPTFE是以下单词的缩写吗？—reinforced poly tetra fluoro ethylene，我自己根据PTFE和网友提供的信息拼来的，不知道对不对。如果有资料来源请提供文件名称与编号。]]></description>
    <pubDate>2011-12-20</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE的焊接和粘接问题]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1262.html</link>
    <description><![CDATA[PTFE的法兰盘和PTFE的管道连接，以前是通过螺纹连接的，可使用温度在100度左右，非连续使用，冷热交替，现在渗液体（常压），现想把螺纹口焊接了，或者粘接起来。非专业人士，且只能在现场搞]]></description>
    <pubDate>2011-12-19</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[阀门的密封采用PTFE，能耐多少度的温度？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1261.html</link>
    <description><![CDATA[阀门的密封采用PTFE，能耐多少度的温度？PTFE的特性？适用温度和介质？PTFE，一般180C，改性PTFE可用到232C,即450F。]]></description>
    <pubDate>2011-12-16</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[PTFE贴膜引起的变送器漂移现象]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1260.html</link>
    <description><![CDATA[PTFE涂层可以提高膜片或法兰的防腐性能。但是高温场合也容易脱落。PTFE贴膜可以起到密封作用和防止介质与膜片直接接触，起到防腐和防结晶的作用。这种贴膜用在高温的场合，可能会引起变送器]]></description>
    <pubDate>2011-12-14</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[国外生产衬PTFE球阀、止回阀比较出名的厂家有哪]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1259.html</link>
    <description><![CDATA[国外生产衬PTFE球阀、止回阀比较出名的厂家有哪些？小型的:OLIVER、世伟洛克、派克；若是大型的:OLIVER有DBB阀门，自己的专利；醋酸项目上，应该材质选择很重要。]]></description>
    <pubDate>2011-12-13</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[水洗塔和硫酸干燥塔材质ETFE与PTFE选材]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1258.html</link>
    <description><![CDATA[关于水洗塔和硫酸干燥塔材质ETFE与PTFE选材，介质为氯甲烷，含微量HCL、二甲醚，温度：30-50℃，压力表压：0.4MPa，塔径600mm，填料塔，谢谢。]]></description>
    <pubDate>2011-12-05</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[钢衬PTFE管适用什么样的垫片？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1257.html</link>
    <description><![CDATA[钢衬PTFE管法兰连接，使用什么样的垫片？HG/T21562-94，补充:10公斤压力，介质是水，用橡胶的划算还是PTFE的划算？]]></description>
    <pubDate>2011-11-22</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[关于聚四氟乙烯（PTFE）垫片拼接]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201112/1256.html</link>
    <description><![CDATA[关于聚四氟乙烯（PTFE）垫片拼接。一种是用特制粘胶剂粘接，有3-4个接头。另一种是用一根长条围起来，1个接头。第一种缺点接头多，第二种缺点围起来垫片不平整，哪一种密封效果比较好。]]></description>
    <pubDate>2011-11-07</pubDate>
    <category>氟塑问答</category>
    <author>PTFE</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[聚四氟乙烯生料带如何着色？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201110/1241.html</link>
    <description><![CDATA[聚四氟乙烯生料带怎么样着色啊？有的说是用颜料有的说是用染料，我想应该是颜料，问题是颜料要什么类型的颜料？]]></description>
    <pubDate>2011-10-06</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[盐酸输送管道用聚丙烯的还是用内衬四氟的呢？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201104/1158.html</link>
    <description><![CDATA[盐酸输送管道用聚丙烯的还是用内衬四氟的呢？聚丙烯管道抗压轻度不够，安装所需要的支架太多。所以一般选择内衬四氟或内衬po的。]]></description>
    <pubDate>2011-04-03</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[请教还原炉电极四氟套问题]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201104/1157.html</link>
    <description><![CDATA[还原炉生产中，电极的四氟护套容易发生被高压启动电流击穿事故，另外在生产中会出现熔胶现象，请各位讨论下原因和应对措施！]]></description>
    <pubDate>2011-04-03</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[国内全衬四氟碳钢球阀是否只有10和16压两种？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1155.html</link>
    <description><![CDATA[国内全衬氟碳钢球阀是否只有10和16压两种？据我的了解有PN2.5Mpa 的衬氟球阀，你可以找一些知名衬氟产品公司咨询一下，国内的很多厂家也可以做PN25等级的阀门，做不到的主要有以下几个问题。]]></description>
    <pubDate>2011-03-28</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[钢衬四氟设备中的四氟是如何衬在钢上的？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1154.html</link>
    <description><![CDATA[钢衬四氟设备中的四氟是如何衬在钢上的？这个目前来说衬里工艺有很多种，含氟塑料种类也是繁多，根据使用工况等来选择。]]></description>
    <pubDate>2011-03-28</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[为什么四氟管不适宜焊接？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1153.html</link>
    <description><![CDATA[为什么四氟管不适宜焊接？四氟管如果出现渗漏或者裂缝等，可以用高分子复合材料来解决，像刷涂油漆一样的，方便快捷。]]></description>
    <pubDate>2011-03-26</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬四氟管路需要用气体或是水进行冲洗吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1152.html</link>
    <description><![CDATA[衬四氟管路需要用气体或是水进行冲洗吗？还是用水冲洗一下比较好，毕竟安装过程中不少管道、管件放在地上，可能会进入泥土、杂物等的，清洗一下并将管路试一下比较可靠。]]></description>
    <pubDate>2011-03-26</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[钢瓶连接的丝扣需要缠四氟带吗?]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1151.html</link>
    <description><![CDATA[钢瓶连接的丝扣需要缠四氟带吗?那得看采取的是各种密封方式。如果不是通过螺纹密封（比如金属密封面）的话就不裹生料带。]]></description>
    <pubDate>2011-03-26</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[四氟垫片使用问题]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1150.html</link>
    <description><![CDATA[四氟垫片使用问题,温度180~185℃、压力0.6Mpa可以用四氟垫的，使用寿命应该可以的，但使用温度不能再高了，否则四氟有可能软化而影响密封效果。]]></description>
    <pubDate>2011-03-26</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[有机氯化物管道用衬四氟和衬搪的优劣比较]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1149.html</link>
    <description><![CDATA[有机氯化物管道用衬四氟和衬搪的优劣比较：衬四氟管道生产技术已经很成熟了，在合理的压力和温度范围内使用是没问题的。有这么几种生产方式1：推拉挤压出管成型，2：等压成型，3：三维旋]]></description>
    <pubDate>2011-03-26</pubDate>
    <category>氟塑问答</category>
    <author>聚四氟乙烯</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[Cadworx2008如何画钢衬四氟管道？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1144.html</link>
    <description><![CDATA[CADWORX2008如何画钢衬四氟管道？Cadworx自带有一个模块，liner管用这个就行，但是需要先进行引用。 ]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[四氟泵叶轮脱落原因分析？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1143.html</link>
    <description><![CDATA[四氟泵叶轮脱落原因分析？选材及操作都存在问题，腐蚀加气蚀引发此现象。]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬四氟离心机什么价格？需要注意哪些问题？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1142.html</link>
    <description><![CDATA[衬四氟离心机什么价格？需要注意哪些问题？和一般的离心机一样的做法，只是衬四氟价格比较贵的，一般离心机表面4000元每平方。]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬氟球阀出现衬套损坏现象,四氟材质耐用吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1141.html</link>
    <description><![CDATA[衬氟球阀出现衬套损坏现象,四氟材质耐用吗？怀疑球阀挤压原因，球阀的球与衬套之间旋转摩擦，使衬套扭曲变形或者磨损，造成损坏。]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[存储和输送20%~30%盐酸，衬四氟管线能用多久？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1140.html</link>
    <description><![CDATA[存储和输送20%~30%盐酸，衬四氟管线能用多久？质量好的应该5年以上没问题，我单位曾经有套铁炉工艺的高纯盐酸装置，成品酸浓度31%，到最后有的管外表钢管都腐蚀没了还在使用。松衬四氟管怕负]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬四氟管线走氢气可以吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1139.html</link>
    <description><![CDATA[原有一根衬四氟管线，介质是HCl气体 ( 含水1%)，想改为走氢气（0.4Mpa),可以吗？哪里有这方面的经验？谢谢！不可以，氢气管道要防止静电累积。]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[聚四氟乙烯只有经表面处理后才能粘连吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1138.html</link>
    <description><![CDATA[聚四氟乙烯真的只有经表面处理后才能粘连吗？最近走遍了我们当地的胶粘市场,没有找到一款能粘连聚四氟乙烯的粘连剂. 我也看了不少相关这方面的文章,知道表面处理聚四氟乙烯可以达到粘]]></description>
    <pubDate>2011-03-19</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬四氟管道一定要预制后安装吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1137.html</link>
    <description><![CDATA[衬四氟管道一定要预制后安装吗？如能不须预制，现场安装就好了。衬PTFE的管道在进行现场安装之前最好要预制好，无论从安装进度、安装成本和使用安全性上都要比现场处理要好的多！]]></description>
    <pubDate>2011-03-14</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[衬四氟反应釜的价格大概是多少？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1136.html</link>
    <description><![CDATA[衬四氟反应釜的价格大概是多少？衬四氟设备，包括储罐、反应釜、管道、阀门等主要是衬PTFE，目前国内做的已经非常多了。]]></description>
    <pubDate>2011-03-14</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[哪家公司的钢衬四氟泵性能比较好？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1135.html</link>
    <description><![CDATA[哪家公司的钢衬四氟泵性能比较好？钢衬四氟的泵目前国内到处都能生产，相对来说，江苏、浙江、上海、安徽等省份的生产厂家较多，钢衬四氟泵的制造技术已经成熟，通常质量都是不错的，你]]></description>
    <pubDate>2011-03-14</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[三元乙丙胶和四氟垫片各自的优缺点有哪些？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1134.html</link>
    <description><![CDATA[三元乙丙胶和四氟垫片各自的优缺点有哪些？四氟垫片耐腐蚀性液体。但是柔韧性及密封性不及三元乙丙垫片。]]></description>
    <pubDate>2011-03-13</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[在工艺空压机的二级出口可以用四氟垫片吗？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1133.html</link>
    <description><![CDATA[在工艺空压机的二级出口可以用四氟垫片吗？使用温度在220度，压力5.5Mpa内是没什么问题的。]]></description>
    <pubDate>2011-03-13</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[用钢衬四氟管道输送可燃液体,如何防止管道静电]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1132.html</link>
    <description><![CDATA[用钢衬四氟管道输送可燃液体,如何防止管道静电?在法兰之间接静地接地线，一般采用2mm厚的铜板和铜编织线把法兰串联起来，这是工艺需要的材料，而接地点要向电器提静电接地条件，一般]]></description>
    <pubDate>2011-03-13</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[有没有四氟浸渍石墨再沸器？]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1131.html</link>
    <description><![CDATA[有没有四氟浸渍石墨再沸器？没有浸渍石墨,就是国外也处于研究阶段,不过有氟化石墨设备。]]></description>
    <pubDate>2011-03-13</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>
<item>
    <title><![CDATA[搪玻璃下展式放料阀用到的四氟孔板材质是什么]]></title>
    <link>http://www.myptfe.com/Teflon/Answers/201103/1130.html</link>
    <description><![CDATA[搪玻璃下展式放料阀用到的四氟孔板材质是什么？是全聚四氟乙烯还是钢衬四氟的呢？当然是四氟了，钢装四氟与介质接触的也是四氟啊，钢衬只不过起到提高强度的作用。]]></description>
    <pubDate>2011-03-13</pubDate>
    <category>氟塑问答</category>
    <author>氟塑料</author>
    <comments>中国氟塑料网</comments>
</item>

</channel>
</rss>

